Cutting and Welding with Propane

This article is originally from the IWDC Chronicles, which is a newsletter for IWDC members.  View the original article and the rest of the newsletter here. This article is by Rich Mansmann, VP of Gas Programs, “An IWDC Member had a problem with sludge build-up on the torch surfaces when using propane in a high volume preheating […]

Read more

Switching to Propane

“Can I switch from Acetylene to another fuel gas, like Propane?” Usually the main reason behind this questions is the high cost of acetylene. But not everyone switches; there are other issues besides cost, which have to be taken into consideration: If you would like to switch to a fuel gas, such as Propane, here […]

Read more

How to Make Your Engine Drive Last Longer

The farmer loved the amount of work his mule did for him. But, it was always irking him that his mule ate too much. He kept thinking about this problem until he came up with a good plan: reduce a little amount of his food and check it if affects the mule’s output of work. […]

Read more

Why Do We Need Check Valves or Flash Back Arrestors?

Why Do We Need Check Valves or Flash Back Arrestors? “Suitable safety devices to prevent reverse gas flow and to arrest a flashback must be installed on each hose in an Oxy-fuel system, between the torch and the regulator.” –Work Safe BC regulation 12.120 Flashback prevention Click here for the publication from WorkSafe BC   […]

Read more

Selecting the Right Cutting Tip

Over decades, there have been many advances in the welding industry. Yet it’s easy to forget how simple and helpful oxy-acetylene cutting is: It is very portable and can easily be brought into the field. You can simply and quickly change the cutting direction during operations. When cutting, you don’t need to move the steel […]

Read more

Making Your Cutting Tips Last

There are three tools which help extend the life of a cutting tip: Tip Cleaner, Tip Reamer, and Tip Drill. These simple handy tools can keep the tip orifices and passages free of slags and burrs, resulting in clean and efficient cuts. The Tip Cleaner Most welders using cutting torches are familiar with the common […]

Read more

How To Get The Best Out Of Your MIG Nozzles

“Look after the pennies and the pounds will look after themselves.” The details will get you if you don’t watch out. To improve your efficiency in MIG welding, one of the things you might want to look at is the nozzle on the MIG gun. If it’s used the way it was designed for, it can help you be more efficient. […]

Read more

A Few Brands That We Are Proud To Carry

  • miller
  • victor
  • esab
  • avesta
  • hypertherm
  • hobart
  • walter
  • weldmark