New From Ron-Son’s Torch

 

MIG Welders

Millermatic® 141

 

Welds 24 gauge – 3/16 in. (0.8-4.8mm) mild steel. Uses 120V power.

 

image

Part No.

Description

List Price

Promo Price

907612

MIG Welder

$1,367

$1,039

951601

MIG Welder W/Running gear & Cyl rack

$1,607

$1,225

 

Millermatic® 190

 

Welds 24 gauge – 5/16 in. (0.8-7.9mm) mild steel. Uses 240V input power.

 

image

 

Part No.

Description

List Price

Promo Price

907613

MIG Welder

$1,657

$1,259

 

Place Your Order Here

 

 

Millermatic® 211

 

Welds material from 24-gauge to 3/8 in thick in a single pass.

 

image

Part No.

Description

List Price

Promo Price*

907614

MIG Welder

$1,2016

$1,535

951603

MIG Welder W/Running gear & Cyl rack

$2,250

$1,709

 

Millermatic® 252

 

Welds material from 22 gauge to 1/2 in thick in a single pass. Highest output in its class.

 

image

 

Part No.

Description

List Price

Promo Price

907321

MIG Welder – 200(208)/ 230V

$4,320

$2,979

951066

MIG Welder W/ Spoolmatic 30A, Reg’l, Dual Cyl Rack

$6,631

$4,735

 

*Rebates have been added to promotional prices
Pricing in effect until October 31st, 2017 or while quantities last. All prices are subject to change, and may vary without prior notice.


 

 

Plasma Cutters


 

Spectrum® 375

 

Cuts up to 3/8 in. mild steel. The unit offers easy connection to 120V or 240V input with Auto-Line technology and MVP Adapters.

image

 

Part No.

Description

List Price

Promo Price

907529

Spectrum® 375 X-TREME with XT30 Torch

$2,447

$1,845

 

Spectrum 625 X-TREME XT40 Quick Connect

 

Powerful 40 amps cuts up to 5/8 inch mild steel and weighs only 21 lbs. X-CASE provides ultimate protection during transport and storage.

 

image

 

Part No.

Description

List Price

Promo Price*

907579

12-ft.

$3,237

$2,439

907579001

20-ft.

$3,447

$2,599

 

Place Your Order Here

 

 

CUTMASTER #42

 

image

 

The Cutmaster 42 is one of the most affordable, highest quality 120V 1/4″ (6 mm) plasma systems on the market. At 230V, the Cutmaster 42 delivers 40A, a recommended cut of 3/8”. As part of the TRUE Series, you can rely on the Cutmaster 42 to cut all day at its recommended cutting capacity and to pack more punch when you need it. The Cutmaster 42 incorporates Vent2Shield ( V2S) technology allowing the use of a considerably smaller compressor (less weight to carry, can be used with 120V) compared to similar 40A units.

 

Part No.

Description

List Price

Promo Price

14200-7

Thermal Dynamics Cutmaster 42

$1,968

$1,375

 

CUTMASTER #52

 

image

 

The Cutmaster 52 is the most powerful 1/2″ (12 mm) machine on the market today. This unit cuts through mild, stainless, or aluminum up to 1 1/8″ (30 mm) thick. The Cutmaster 52 combines power with the well known performance and features of the industry-leading 1Torch®.

 

Part No.

Description

List Price

Promo Price

151302

Thermal Dynamics Cutmaster 52

$3,024

$2,113

 

*Rebates have been added to promotional prices
Pricing in effect until October 31st, 2017 or while quantities last. All prices are subject to change, and may vary without prior notice.


 

 

TIG Welders


Dynasty® 210

 

image

 

A perfect combination of sophisticated inverter technology and advanced features, offering the most flexible AC/DC TIG/Stick power supply in the welding industry.

 

What’s included:

Dynasty® 210/ 210 DX

Coolmate™ 1.3

Small Runner Cart

Weldcraft™ W-280 torch kit and accessories (300990)

Coolant (4 one-gallon booles of 043810)

RFCS-14HD remote foot control and receiver (194744)

Quick Reference Guide

 

Part No.

Description

List Price

Promo Price*

951666

Dynasty® 210, 120-480 V, PKG

$9,095

$6,405

951668

Dynasty® 210 DX, 120-480 V, PKG

$9,703

$6,869

 

Dynasty® 280

 

image

 

The Dynasty 280 Series is a powerful combination of capability and portability. Weighing only 52 pounds, it can weld up to 3/8″ thick material. The AC/DC TIG/Stick power sources feature an energy-efficient inverter design and Auto-Line™ technology.

 

What’s included:

Dynasty® 210/ 210 DX

Coolmate™ 1.3

Small Runner Cart

Weldcraft™ W-280 torch kit and accessories (300990)

Coolant (4 one-gallon booles of 043810)

RFCS-14HD remote foot control and receiver (194744)

Quick Reference Guide

 

Part No.

Description

List Price

Promo Price

951466

Dynasty® 280 208-575 V, PKG

$11,020

$9,438

951468

Dynasty® 280 208-575 V, DX PKG

$12,316

$10,547

 

Place Your Order Here

 

Syncrowave® 210

 

image

 

The easy-to-use Syncrowave® 210 provides legacy arc performance that allows you to expand your capabilities with an all-in-one package.

 

Part No.

Description

List Price

Promo Price*

907596

Syncrowave® 210 TIG Pkg

$4,703

$3,569

951684

Syncrowave® 210 TIG Pkg, W/Spoolmatic 150 gun

$4,703

$3,569

 

Diversion® 165

 

image

 

The Personal User TIG machine, the Diversion 165 is an easy-to-understand inverter-based AC/DC machine. Only three switches to operate: a power switch, a material selection switch, and an amperage control/ material selection switch.

 

Part No.

Description

List Price

Promo Price

907626

Diversion® 165 TIG Welder

$2,893

$2,477

 

Diversion® 180

 

image

 

Perfect for the personal user, this AC/DC TIG machine upgrade has both 115V and 230V input power capability.

 

Part No.

Description

List Price

Promo Price*

907627

Diversion® 180 TIG

Welder

$3,657

$2,279

 

*Rebates have been added to promotional prices
Pricing in effect until October 31st, 2017 or while quantities last. All prices are subject to change, and may vary without prior notice.


 

 

Engine Driven Welders

 

Bobcat™ 225

 

Cost-effective, multiprocess welder/generator primarily used for Stick welding and generator power. Great for farm, ranch, maintenance/repair operations and as a stand-alone generator.

 

image

 

Part No.

Description

List Price

Promo Price

907498001

Bobcat™ 225 (Kohler)

$6,075

$4,615

 

Place Your Order Here

 

Trailblazer® 325

 

image

 

Trailblazer® welder/generators deliver unbeatable arc performance providing the smoothest, most stable arc in the industry. The Trailblazer exclusive Auto-Speed™ technology delivers superior runtimes, increased fuel efficiency, and improved welder/generator performance.

No other compact machine in the 300-amp class delivers more welding power or more auxiliary power with better fuel efficiency and less noise — for productive, profitable, quieter job sites.

 

Safer, more productive job sites

 

Quieter job sites are safer and more productive because work crews can communicate easier, and work can start earlier and end later — even in noise-sensitive areas. If your worksite needs a welder/generator, it needs a Miller Trailblazer welder/generator — because no other gas-fuelled choice is as quiet. It would take seven Trailblazers to match the sound output of one competitor machine.

 

Part No.

Description

List Price

Promo Price*

907510001

Trailblazer® 325 (Kohler)

$8,521

$6,469

 

*Rebates have been added to promotional prices
Pricing in effect until October 31st, 2017 or while quantities last. All prices are subject to change, and may vary without prior notice.


 

 

Multi Processors


 

FABRICATOR 141i

 

Fabricator® 141i delivers 3-in-1 MIG, STICK, and TIG capability from one integrated portable system. Fabricator 141i features digital meters, 4T trigger control and quick change polarity from the front of the power source. Overload protection shuts down the power source to protect the internal electrical components from overheating. Intelligent fan control operates when welding commences to cool components and reduce airborne contaminants pulled through the power source.

 

image

 

Part No.

Description

List Price

Promo Price

w1003141

FABRICATOR 141i

$1,008

$845

 

Place Your Order Here

 

 

Fabricator 252i

 

Delivers 3-in-1 MIG, Stick and TIG capability from one integrated portable system with automatic input voltage selection from 208 – 230 VAC and an operating range of 187 – 276 VAC. Pre and post flow, down slope, hot start, spot, burn back, wire sharp, arc hour runtime, and run-in speed are some of the features that set this machine apart.

 

image

 

PFC Power Factor Correction saves up to 40% power compared to conventional MIG welders. Additional features include 4T trigger control, remote receptacle, quick change polarity and overload protection for optimum performance and safety.

 

Part No.

Description

List Price

Promo Price

W1004401

FABRICATOR 225i

$3,009

$2,523

 

Pricing in effect until October 31st, 2017 or while quantities last. All prices are subject to change, and may vary without prior notice.


 

 

Gas Cylinders – Comes Full With Gas

 

Gas Type

Cylinder Size

Cubic Ft.

Weight

List Price

Promo Price

Acetylene

B

40 cf

25 lbs

$161

$157

Acetylene

75

75 cf

43 lbs

$281

$269

C25 (CO2/Argon Mix)

80

80 cf

46 lbs

$269

$248

Oxygen

55

55 cf

32 lbs

$182

$169

Oxygen

80

80 cf

46 lbs

$228

$215

image              image

 

Place Your Order Here

 

 

 

Pricing in effect until October 31st, 2017 or while quantities last. All prices are subject to change, and may vary without prior notice.


 

 

Safety Equipment


Digital Elite

 

image

 

Versatile Helmets for Demanding Applications

 

Part No.

Description

List Price

Promo Price

257213

Black

$425.60

$356.50

257217

Inferno

$467.60

$391.50

 

Moldex Particulate Respirators

 

The molded nose bridge with soft foam nose cushion provides the wearer an easy comfortable fit. There’s no metal noseband to adjust and the seal is maintained without pressure points.

 

image

 

The Dura-Mesh® shell, exclusive to Moldex®, protects the filter media so it stays cleaner-looking longer. The shell resists collapsing, even in heat and humidity so the respirator holds its shape longer. The result is fewer respirators used and lower costs.

 

Part No.

Size

Qty. Per Box

List Price

Promo Price

2200N95

M/L

20 Respirators per box

$55.60

$44.75

 

Place Your Order Here

 

 

LPR-100™ Half Mask

 

image

 

Low-profile design fits comfortably underneath a welding helmet without obstructing your field of view.

 

Part No.

Size

List Price

Promo Price

ML00894

S/M

$39

$33

ML00895

M/L

$39

$33

 

P100 Filters

 

image

 

Provides 99.97% filtration of airborne particles and oil aerosols.

 

Part No.

Description

List Price

Promo Price

SA00818

P100 Filters, Pair

$14.55

$12

 

FlakFinger™

 

image

 

Every TIG welder knows that hand protection can be a balancing act — the need for finger control and finesse at odds with the need for heat resistance. Black Stallion® solves the problem with our new FlakFinger™ heat-shielding sleeve. Slide the FlakFinger™ over your TIG glove, secure the adjustable strap, and keep your fingers cool and comfortable while moving the puddle along.

 

Part No.

Description

List Price

Promo Price

AT2010-WG

FlakFinger™ Adjustable Welding Heat Shield for Fingers and Hand

$30

$23

 

Pricing in effect until October 31st, 2017 or while quantities last. All prices are subject to change, and may vary without prior notice.


 

 

Welding Consumables


Blue Demon MIG Wire ER308L .023

image

 

ER 308/308L is used for welding types 304, 304L, 308 and 308L stainless steels. It is very similar to type 308, but has carbon content held to a max of .03% to avoid carbide precipitation. This product can also be used for welding types 312 and 347 stainless steels. This wire is suitable for applications at cryogenic temperatures.

 

Part No.

Description

List Price

Promo Price

WEM 308L0232

WIRE, MIG ER308L 023 X 2 LB SPOOL

$32.25

$26.50

 

Weldmark MIG Wire ER70S6 .035

 

image

 

Part No.

Description

List Price

Promo Price

WEM 0352

WIRE, MIG ER70S6 035 X 2 LB SPOOL

$9.15

$6.70

 

Place Your Order Here

 

Victor Style Cuing Tip

 

 

Part No.

Description

List Price

Promo Price

1-101

2-101

3-101

G Series Acetylene Victor Style Tip, Weldmark By Victor

$19.50

$8.99

 

Nozzle Firm Gel Dip

 

image

 

For MIG gun nozzles and contact tips. Suitable for use on fixtures of semi-automatic and automatic welding equipment.

 

Part No.

Description

List Price

Promo Price

WEM WM731

Nozzle firm gel dip 16 oz. jar

$8.85

$6.25

 

Galvanized Matte Finish Zinc Spray

 

image

Galvanized 309 Spray produces a hard coating that will stop rust and rust corrosion on all metal surfaces. Contains metallic zinc dust, resin and other additives. Equal to hot dip galvanizing in cathodic protection, film durability and protection against caustic action of salt and protection against rust and corrosion.

 

Part No.

Description

List Price

Promo Price

WEM WM309

Galv. matte finish zinc spray

$13.50

$8.50


Pricing in effect until October 31st, 2017 or while quantities last. All prices are subject to change, and may vary without prior notice.

A Few Brands That We Are Proud To Carry

  • miller
  • victor
  • esab
  • avesta
  • hypertherm
  • hobart
  • walter
  • weldmark